Petrotech Engineers

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration.

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

Petrotech Engineers is ULTRA-5000 series ultrasonic water meter is a highly integrated two-channel, four-channel ultrasonic water meter according to ISO4064-2014.This series of ultrasonic water meters has the advantages of high range ratio, ultra-low power

consumption, stable and reliable operation, etc. Every part of the water meter has IP68 protection level, which can be used in various harsh working environments, and is widely used in urban water supply, water resources management, agricultural irrigation, landscaping, industrial production and other industries. It is a major innovation in water metering technology.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

Explosion Proof Ultrasonic Flowmeter is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

Clamp On Ultrasonic BTU Meter is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

PETROTECH ULTRASONIC CLAMP-ON FLOW METER is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.

Ultrasonic Heat BTU Meter is a non-invasive device used to measure the flow rate of liquids inside pipes without the need to cut into or disrupt the pipeline. These meters use ultrasonic signals to determine the velocity of the fluid and calculate the flow rate.The flow meters are ideal for process-control or flow measurement at fixed locations.Their non-invasive nature makes them indispensable in applications such as chemical liquid processing, hygienic process monitoring, high – pressure flow measurement, etc.benefited from our advanced digital signal processing technology, the flow water,including hot water, chilled water, city water, sea water etc.
Clamp-on flow meters typically operate using ultrasonic measurement principles:
Transit-Time Method (For clean or slightly dirty liquids)

FEATURES:-

1. Cost effective and Versatility
2. High accuracy, better than /- 1.0% read
3. Noninvasive, no moving parts, no pressure drop, no maintenance
4. Easy and economical installation, no pipe cutting
5. Wide measurement range, 0.03 ~40ft/s (0.01~12m/s)
6.  Wide pipe size range, ¾~180 inches (DN20~4570mm)
7. Suitable for all commonly used pipe materials
8. Signal quality tracking and self-adjusting capabilities. Automatically match transducer to pipe material.
9. Velocity, volumetric and totalized flow.
10.  Easy to use and set up. Self-explanatory menu-driving programming.
11.  Rich input and output functionalities.
12. Ideal for both clean and opaque liquid flow measurement, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration

Application:-

1. Secondary Sewage, Waste Treatment etc.,
2. Oil including lubricating oil, diesel oil, fuel oil, etc.,
3. Solvents
4. Beverage, Food and Pharmaceutical
5. Processor where non – contact is a must.
6. HVAC, energy measurement system, etc.