Vortex Flow Meter
Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
Vortex Flow Meter
₹ 27858 / Piece Get Latest Price
| Fluid Type | Compressed Air, Saturated Steam, Superheated Steam, Hot Water, Gas, Oil, Air, Steam, Water |
| Line Size | 20 mm |
| End Connection | Wafer |
| Output Signal | Pulse, 4–20 mA HART, Frequency, 4–20 mA, Modbus |
| Display | Digital |
| Temperature | -40 to 350 Deg. C |
| Repeatability | 0.02% |
| Flow Range | Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
| Brand Name | PETROTECH |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Steam Flow Meter
₹ 23556 / Piece Get Latest Price
| Meter Technology | Vortex |
| Steam Type | Saturated Steam |
| Line Size | 100 mm |
| Accuracy | 1% |
| Output Signal | Modbus, Pulse, HART, 4–20 mA |
| Display | Digital |
| Flow Range | 0-70.0m/s |
| Brand | PETROTECH |
| Model Name/Number | VT-400 |
| End connection | FLANGE |
| Material | SS 316 |
| Power Supply | 24VDC |
| Temperature | 350 DEG C |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Flow Meter
₹ 23525 / Piece Get Latest Price
| Fluid Type | Hot Water, Gas, Air, Saturated Steam, Oil, Compressed Air, Steam, Water, Superheated Steam |
| Line Size | 80 mm |
| End Connection | Flanged |
| Output Signal | Pulse, 4–20 mA, Modbus, Frequency, 4–20 mA HART |
| Display | Digital |
| Temperature | 320 DEG C |
| Repeatability | 0.2% |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Industrial Vortex Flowmeters
₹ 25474 / Piece Get Latest Price
| Fluid Type | Steam, Saturated Steam, Water, Gas, Oil, Superheated Steam, Hot Water, Air, Compressed Air |
| Line Size | 80 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA, Frequency, 4–20 mA HART, Modbus, Pulse |
| Display | Digital |
| Temperature | 350 DEG C |
| Repeatability | 0.2% |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA HART |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Digital Steam Flow Meter
₹ 25654 / Piece Get Latest Price
| Meter Technology | Vortex |
| Steam Type | Saturated Steam |
| Line Size | 150 mm |
| Accuracy | 0.5% |
| Output Signal | HART, Modbus, 4–20 mA, Pulse |
| Display | Digital |
| Flow Range | 0.4-7.0m/s |
| Brand | PETROTECH |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Power Supply | 24VDC |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
SS Vortex Flowmeters
₹ 25133 / Piece Get Latest Price
| Fluid Type | Saturated Steam, Gas, Superheated Steam, Hot Water, Compressed Air, Oil, Steam, Water, Air |
| Line Size | 150 mm |
| End Connection | Welded |
| Output Signal | Modbus, Pulse, 4–20 mA, 4–20 mA HART, Frequency |
| Display | Digital |
| Temperature | 350 DEG C |
| Repeatability | 0.2% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 304 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
IBR Vortex Flow Meter
₹ 25475 / Piece Get Latest Price
| Fluid Type | Superheated Steam, Hot Water, Saturated Steam, Water, Steam, Gas, Compressed Air, Air, Oil |
| Line Size | 200 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA HART, Frequency, Pulse, Modbus, 4–20 mA |
| Display | Digital |
| Repeatability | 0.2% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 304 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Pressure Compensated Vortex Flow Meter
₹ 25475 / Piece Get Latest Price
| Fluid Type | Hot Water, Compressed Air, Oil, Steam, Water, Air, Saturated Steam, Superheated Steam, Gas |
| Line Size | 100 mm |
| End Connection | Flanged |
| Output Signal | Modbus, Pulse, 4–20 mA HART, Frequency, 4–20 mA |
| Display | Digital |
| Temperature | 350 DEG C |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS |
| Communication | RS 485 |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Gas Vortex Flow Meter
₹ 25476 / Piece Get Latest Price
| Fluid Type | Oil, Compressed Air, Steam, Saturated Steam, Gas, Hot Water, Air, Superheated Steam, Water |
| Line Size | 40 mm |
| End Connection | Wafer |
| Output Signal | 4–20 mA HART, Pulse, Modbus, Frequency, 4–20 mA |
| Display | Digital |
| Temperature | 350 deg c |
| Flow Range | 4.0-60.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Stainless Steel Vortex Flowmeters
₹ 26554 / Piece Get Latest Price
| Fluid Type | Compressed Air, Saturated Steam, Superheated Steam, Hot Water, Oil, Steam, Water, Air, Gas |
| Line Size | 40 mm |
| End Connection | Wafer |
| Output Signal | Pulse, 4–20 mA, Modbus, 4–20 mA HART, Frequency |
| Display | Digital |
| Temperature | 350 Deg C |
| Flow Range | 4.0-60.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | RS 485 |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Biogas Flow Meter
₹ 25425 / Piece Get Latest Price
| Fluid Type | Water, Saturated Steam, Steam, Gas, Compressed Air, Superheated Steam, Oil, Air, Hot Water |
| Line Size | 50 mm |
| End Connection | Flanged |
| Output Signal | Frequency, Pulse, 4–20 mA, Modbus, 4–20 mA HART |
| Display | Digital |
| Temperature | 120 DegreeC |
| Repeatability | 0.2% |
| Flow Range | 4.0-60.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 304 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Petrotech Air Flow Meter
₹ 25476 / Piece Get Latest Price
| Technology | Vortex |
| Line Size | DN100 (4 inch) |
| Output Signal | RS485 (Modbus), Pulse, Relay, HART, 4-20 mA, Ethernet |
| Model Name/Number | VT-400 |
| Display | Digital |
| Flow Range | 4.0-60.0m/s |
| Brand | PETROTECH |
| Material | SS 316 |
| Measurable Media | Air, Steam, Compressed Air, Natural Gas, Argon, Oxygen, Nitrogen, Biogas |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Paper Mill Vortex Flow Meter
₹ 25029 / Piece Get Latest Price
| Fluid Type | Hot Water, Compressed Air, Oil, Air, Steam, Saturated Steam, Superheated Steam, Gas, Water |
| Line Size | 25 mm |
| End Connection | Flanged |
| Output Signal | Pulse, 4–20 mA HART, 4–20 mA, Modbus, Frequency |
| Display | Digital |
| Temperature | 250 DegC |
| Repeatability | 0.2% |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Flow Transmitter
₹ 25429 / Piece Get Latest Price
| Fluid Type | Hot Water, Superheated Steam, Oil, Compressed Air, Water, Steam, Air, Saturated Steam, Gas |
| Line Size | 20 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA, Pulse, 4–20 mA HART, Frequency, Modbus |
| Temperature Range | 250 DEG C |
| Model Name/Number | VT-400 |
| Communication | Modbus, HART, Profibus |
| Material | SS 304 |
| Voltage | 24 VDC |
| Analog Output | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Industrial Vortex Meter
₹ 25427 / Piece Get Latest Price
| Fluid Type | Oil, Water, Hot Water, Steam, Air, Superheated Steam, Saturated Steam, Compressed Air, Gas |
| Line Size | 80 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA, Modbus, 4–20 mA HART, Pulse, Frequency |
| Display | Digital |
| Temperature | 200 DEG C |
| Repeatability | 0.2% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Liquid Vortex Flow Meter
₹ 25425 / Piece Get Latest Price
| Fluid Type | Air, Oil, Gas, Superheated Steam, Compressed Air, Hot Water, Saturated Steam, Water, Steam |
| Line Size | 20 mm |
| End Connection | Wafer |
| Output Signal | Modbus, Frequency, Pulse, 4–20 mA HART, 4–20 mA |
| Display | Digital |
| Temperature | 350 DEG C |
| Flow Range | 4.0-60.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | RS-485 |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Digital Vortex Flow Meter
₹ 24529 / Piece Get Latest Price
| Fluid Type | Superheated Steam, Hot Water, Air, Compressed Air, Steam, Saturated Steam, Gas, Water, Oil |
| Line Size | 25 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA HART, Modbus, 4–20 mA, Pulse, Frequency |
| Display | Digital |
| Temperature | -40 to 350 Deg. C |
| Repeatability | 0.02% |
| Flow Range | Liquid:0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 304 |
| Communication | 4-20 mA HART |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Steam Flow Meters
₹ 25426 / Piece Get Latest Price
| Fluid Type | Oil, Air, Superheated Steam, Gas, Water, Compressed Air, Hot Water, Steam, Saturated Steam |
| Line Size | 50 mm |
| Accuracy | 0.5% |
| Output Signal | Pulse, Modbus, Frequency, 4–20 mA HART, 4–20 mA |
| Display | Digital |
| Flow Range | 0-60.0m/s |
| Brand | PETROTECH |
| Model Name/Number | VT-400 |
| End connection | FLANGE AND THREAD |
| Communication | Profibus, Modbus, HART |
| Material | SS 304 |
| Power Supply | 230 VAC |
| Temperature | 350 DEG C |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Inline Vortex Flow Meter
₹ 19557 / Piece Get Latest Price
| Fluid Type | Steam, Saturated Steam, Water, Hot Water, Air, Oil, Compressed Air, Superheated Steam, Gas |
| Line Size | 100 mm |
| End Connection | Flanged |
| Brand | Petrotech |
| Application Media | Any Liquid |
| Output Signal | Pulse, Frequency, 4–20 mA HART, Modbus, 4–20 mA |
| Material | Stainless Steel |
| Communication | Profibus, HART, Modbus |
| Country of Origin | Made in India |
| FLOW RANGE | 0.4-7.0m/s |
| Connection | Flange |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Wafer Type Vortex Flowmeter
₹ 25426 / Piece Get Latest Price
| Fluid Type | Steam |
| Line Size | 50 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA HART, Pulse, 4–20 mA, Modbus, Frequency |
| Temperature | 350 DEG c |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20 mA HART |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Thermic Fluid Flow Meter
₹ 25425 / Piece Get Latest Price
| Meter Technology | Vortex |
| Liquid Type | Solvent |
| Line Size | 65 mm |
| Flow Range | 4.0-60.0m/s |
| Application Media | Water |
| Display | Local |
| Operating Temperature | 350 DEG C |
| Output Signal | No Output, Modbus, HART, 4–20 mA, Pulse |
| Accuracy | 1% |
| Power Supply | 24VDC |
| Brand | PETROTECH |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Digital Vortex Flow Meter
₹ 25424 / Piece Get Latest Price
| Fluid Type | Compressed Air, Gas, Saturated Steam, Steam, Hot Water, Air, Superheated Steam, Oil, Water |
| Line Size | 80 mm |
| End Connection | Flanged |
| Output Signal | Pulse, Frequency, 4–20 mA, 4–20 mA HART, Modbus |
| Display | Digital |
| Temperature | 350 DEG C |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | HASTALLOY C |
| Communication | HART 4-20 mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Digital Air Flow Meter
₹ 25428 / Piece Get Latest Price
| Technology | Vortex |
| Line Size | DN150 (6 inch) |
| Output Signal | 4-20 mA, RS485 (Modbus), Pulse, Ethernet, HART, Relay |
| Model Name/Number | VT-400 |
| Display | Digital |
| Flow Range | 5.0-70.0m/s |
| Brand | PETROTECH |
| Material | SS 316 |
| Measurable Media | Oxygen, Steam, Natural Gas, Biogas, Compressed Air, Air, Nitrogen, Argon |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex P&T Flowmeter
₹ 21556 / Piece Get Latest Price
| Fluid Type | Water, Hot Water, Oil, Gas, Compressed Air, Saturated Steam, Air, Steam, Superheated Steam |
| Line Size | 40 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA, 4–20 mA HART, Frequency, Pulse, Modbus |
| Display | Digital |
| Temperature | 350 DegreeC |
| Repeatability | 0.2% |
| Flow Range | 4.0-60.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Air Flow Meter
₹ 21556 / Piece Get Latest Price
| Technology | Vortex |
| Line Size | DN100 (4 inch) |
| Output Signal | Pulse, RS485 (Modbus), Ethernet, 4-20 mA, Relay, HART |
| Model Name/Number | VT-400 |
| Display | Digital |
| Flow Range | 0.4-7.0m/s |
| Brand | PETROTECH |
| Material | SS 306 |
| Measurable Media | Biogas, Nitrogen, Compressed Air, Argon, Natural Gas, Steam, Air, Oxygen |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Compressor Air Flow Meter
₹ 25427 / Piece Get Latest Price
| Meter Technology | Vortex |
| Installation Type | Inline |
| Line Size Range | 25–100 mm |
| Brand | PETROTECH |
| Display | Digital |
| Output Signal | Pulse, Modbus, HART, 4–20 mA |
| Flow Range | 5.0-70.0m/s |
| Material | SS 304 |
| Temperature | 350 deg c |
| Repeatability | 0.2% |
| Model Name/Number | VT-400 |
| Communication | 4-20 mA |
| Operating Pressure | 12 |
| Operating Temperature | 100 deg c |
| Country of Origin | Made in India |
| Brand name | Petrotech |
| Response time | 2s |
| accuracy | 1% |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Mass Flow Meter
₹ 251116 / Piece Get Latest Price
| Fluid Type | Steam, Saturated Steam, Compressed Air, Gas, Oil, Hot Water, Air, Superheated Steam, Water |
| Line Size | 20 mm |
| End Connection | Threaded |
| Output Signal | Pulse, 4–20 mA, 4–20 mA HART, Modbus, Frequency |
| Display | Digital |
| Temperature | 265 DEG C |
| Repeatability | 0.2% |
| Flow Range | 5.0-70.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 304 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Automotive Vortex Flow Transmitter
₹ 25445 / Piece Get Latest Price
| Fluid Type | Hot Water, Steam, Saturated Steam, Compressed Air, Air, Water, Superheated Steam, Gas, Oil |
| Line Size | 20 mm |
| End Connection | Flanged |
| Output Signal | Modbus, 4–20 mA HART, Pulse, Frequency, 4–20 mA |
| Display | Digital |
| Temperature | 261 DegreeC |
| Repeatability | 0.2% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Process Vortex Sensor
₹ 25476 / Piece Get Latest Price
| Fluid Type | Compressed Air, Steam, Oil, Air, Hot Water, Superheated Steam, Saturated Steam, Water, Gas |
| Line Size | 50 mm |
| End Connection | Threaded |
| Output Signal | Frequency, Modbus, 4–20 mA HART, 4–20 mA, Pulse |
| Display | Digital |
| Temperature | 250 deg C |
| Repeatability | 0.2% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Shedding Flow Meter
₹ 25656 / Piece Get Latest Price
| Fluid Type | Compressed Air, Air, Superheated Steam, Hot Water, Gas, Saturated Steam, Oil, Water, Steam |
| Line Size | 50 mm |
| End Connection | Flanged |
| Output Signal | 4–20 mA HART, Modbus, Pulse, Frequency, 4–20 mA |
| Display | Digital |
| Temperature | 230 DEG C |
| Repeatability | 0.2% |
| Flow Range | 4.0-60.0m/s |
| Material | SS 316 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Vortex Swirl Flow Meters
₹ 25662 / Piece Get Latest Price
| Fluid Type | Oil, Steam, Hot Water, Compressed Air, Gas, Saturated Steam, Water, Air, Superheated Steam |
| Line Size | 25 mm |
| End Connection | Flanged |
| Output Signal | Pulse, Frequency, 4–20 mA, Modbus, 4–20 mA HART |
| Display | Digital |
| Temperature | 400 DegreeC |
| Repeatability | 0.22% |
| Flow Range | 0.4-7.0m/s |
| Model Name/Number | VT-400 |
| Material | SS 316 |
| Communication | 4-20mA |
| Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Petrotech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc...
Vortex Theory: One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, then we get the computation formula:
f=StV/d
St: Strouhal number (Constant)
APPLICATIONS
- Pure liquids and hydrocarbon with low viscosity (< 10 cP)
- Water Industry
- Chemicals that suitable with S.S. 316 Material
- Saturated steam5. Superheated steam
- Industrial gases
- Compressor air measurement
FEATURES
- No moving parts, wear resistance with a simple and fastness structure
- The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy
- Meter body adopts stainless steel material, corrosion-proof
- Pulse signal output, two-wire system 4-20mA current output, RS-485 output
TECHNICAL DATA SHEET
|
Type : with / without Compensation of pressure and Temperature |
|
Enclosure : Die cast aluminum / Stainless steel |
|
Sensor : stainless steel 316 / Tantalum |
|
Repeatability : 0.02% |
|
Accuracy : +/- 0.5 for liquid,1% for gas/steam/air/vapor |
|
Flow range : Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s, Steam:5.0-70.0m/s |
|
Maximum working pressure : 60 bar Fluid &Ambient temperature: -40 to 350 Deg. C |
|
Connection : Thread (M)/ Flange. |
|
Display : LCD with Backlight display |
|
Power voltage: 24 V DC/ 230VAC |
|
output signal: 4 TO 20 mA,HART, RS 485 |
|
Optional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly. |
Product Videos
Water Tank Water Level Indicator
Get QuoteLevel Measuring Indicator
Get QuoteTank Float Level Indicators
Get QuoteContact Us
Jayesh Patel (Proprietor)
Petrotech Engineers
Ground Floor, 485-486/A3, Ashtmangal Industrial Shed, Gidc Estate, Makarpura
Vadodara - 390010, Gujarat, India